Design and construction of a cold room with photovoltaic support for lighting

Ricardo Fabricio Muñoz Farfán; Telly Yarita Macías Zambrano; Victor Manuel Delgado Sosa; Jorge Daniel Menéndez López; Germán Temístocles Ramos León

doi:10.31295/ijcms.v3n1.600

Authors

Ricardo Fabricio Muñoz Farfán
itspem.rmunoz@gmail.com
Instituto Superior Tecnológico Paulo Emilio Macías, Portoviejo, Manabí
Telly Yarita Macías Zambrano Instituto Superior Tecnológico Paulo Emilio Macías, Portoviejo, Manabí
Victor Manuel Delgado Sosa Instituto Superior Tecnológico Paulo Emilio Macías, Portoviejo, Manabí
Jorge Daniel Menéndez López Instituto Superior Tecnológico Paulo Emilio Macías, Portoviejo, Manabí
Germán Temístocles Ramos León Instituto Superior Tecnológico Paulo Emilio Macías, Portoviejo, Manabí

Keywords:

freezing, installed capacity, photovoltaic panel, R-22 gas, temperature, TH20 roller

Abstract

One of the problems encountered today is the inefficiency of refrigeration systems and electrical equipment. The present study proposes the manufacture of a refrigeration chamber that responds to a great variety of needs both in industrial processes, medicine, and domestic service, becoming an indispensable process within the socio-productive sector. The proposed system has an investigative scope, as a contribution to the agricultural food sector for the derivation of variables and the behavior of products (plants-food) and its method of conservation for quality towards the consumer. The type of investigation responds to the experimentation supported by an observation card with variable rate testing tests. Given the aforementioned, a freezing and refrigeration system is elaborated, taking advantage and optimizing an air conditioning system that works up to 24°C in the room and under the modification obtain temperatures of -15°C, starting from an average temperature of 29°C and a 65% relative humidity of the outside.

Downloads

Download data is not yet available.

References

Bravo, D., González, F., & González, J. (2018). Solar cooling of buildings. A state of the art. Construction Engineering Magazine, 33 (2), 115-126.

Cho, K., & Tae, S. J. (2001). Condensation heat transfer for R-22 and R-407C refrigerant–oil mixtures in a microfin tube with a U-bend. International Journal of Heat and Mass Transfer, 44(11), 2043-2051. https://doi.org/10.1016/S0017-9310(00)00253-2

Eduard, M., Sequera, S., Sánchez, D., Henríquez, AB, Romero, M., & Vizcarra, M. (2010). Variations in the protein composition of mature human milk during frozen storage. Pediatrics (Asunción): Official Organ of the Paraguayan Pediatric Society, 37 (3), 187-194.

El Mays, A., Ammar, R., Hawa, M., Abou Akroush, M., Hachem, F., Khaled, M., & Ramadan, M. (2017). Improving photovoltaic panel using finned plate of aluminum. Energy Procedia, 119, 812-817. https://doi.org/10.1016/j.egypro.2017.07.103

FAO. (2017). Perpectiva mundial del atun. Información y Análisis sobre el Comercio Mundial de Pescado.

Farfán, R. F. M., Zambrano, T. Y. M., Badillo, F. R. A., & Solís, A. A. H. (2020). Design and Construction of an Industrial Ship Conditioning System. International Journal of Physical Sciences and Engineering, 4(1), 29-38.

Gámez, MR, Pérez, AV, & Álava, LAC (2019). University work as a guarantee of sustainable development. Practical experiences. EDUCARE-UPEL-IPB-Second New Stage 2.0 Magazine, 23 (2), 56-76.

García, A., & Pacheco-Delahaye, E. (2007). Efecto de la temperatura sobre la calidad postcosecha del apio criollo. Agronomía Tropical, 57(4), 323-330.

Gónzalez de la Cruz, R., & Gónzalez, R. (2006). Metodología para la evaluación de sistemas de refrigeración industrial. Scientia Et Technica, XII(30), 215-217.

Gooding, J., Edwards, H., Giesekam, J., & Crook, R. (2013). Solar City Indicator: A methodology to predict city level PV installed capacity by combining physical capacity and socio-economic factors. Solar Energy, 95, 325-335. https://doi.org/10.1016/j.solener.2013.06.027

Logicbus. (2020). www.logicbus.com.mx.

Ministerio de Acuacultura y Pesca. (2014). En Manta: Países del Océano Pacífico Oriental analizan el estado poblacional del dorado. BOLETÍN N° 092/VAP.

Nižeti?, S., ?oko, D., Yadav, A., & Grubiši?-?abo, F. (2016). Water spray cooling technique applied on a photovoltaic panel: The performance response. Energy conversion and management, 108, 287-296. https://doi.org/10.1016/j.enconman.2015.10.079

Oh, H. K., & Son, C. H. (2011). Condensation heat transfer characteristics of R-22, R-134a and R-410A in a single circular microtube. Experimental thermal and fluid science, 35(4), 706-716. https://doi.org/10.1016/j.expthermflusci.2011.01.005

Pérez, AV, Araus, WMS, Viteri, CGV, & Gámez, MR (2020). A model for sustainable energy development. The university, geography and endogenous resources / A model for sustainable energy development. The university, geography and endogenous resources. Venezuelan Geographical Magazine, 61 (1), 220-234.

Quinto, P., Carvajal, I., Sánchez, F., & Abugaber, J. (2005). Evaluation of a refrigeration system using endoreversible thermodynamics. Technological information, 16 (5), 49-55.

Real Pérez, G. L. (2017). Seguridad, Ambiente y Fuentes Renovadles de Energía. Ecuador: Editorial Mar Abierto.

Rehman, S., Ahmed, M. A., Mohamed, M. H., & Al-Sulaiman, F. A. (2017). Feasibility study of the grid connected 10 MW installed capacity PV power plants in Saudi Arabia. Renewable and Sustainable Energy Reviews, 80, 319-329. https://doi.org/10.1016/j.rser.2017.05.218

Rodríguez, M., & Vázquez, A. (2018). La Energía Fotovoltaica en la Provincia de Manabí (Ediciones UTM ed.).

Rota, MMI, & González, GDVR (2006). Effect Of Storage Time At -18 ° C On The Bacteriological And Physical-Chemical Characteristics Of Flyingfish Fillets (Dactylopterus volitans). Scientific Journal, 16 (2), 195-201.

Solares, L. c. (2021). https://casasolar.online/. Retrieved from Evaluación de un Sistema de Refrigeración usando la Termodinámica Endorreversible

Syrek, K., Sennik-Kubiec, A., Rodríguez-López, J., Rutkowska, M., ?mudzki, P., Hnida-Gut, K. E., ... & Sulka, G. D. (2020). Reactive and morphological trends on porous anodic TiO2 substrates obtained at different annealing temperatures. International Journal of Hydrogen Energy, 45(7), 4376-4389.

TURCK. (2020). TURCK.COM.