Theoretical study of the movement process of destroyed seeds and fiber in the new construction saw gin working camera
Keywords:
cotton, gin, quality, seed, working chamberAbstract
A theoretical study of the process of movement of a dehydrated seed + fibrous medium in a saw gin working chamber has been carried out. The process representing the motion of a depleted seed + fibrous medium is mathematically constructed, based on which the corresponding differential equations are constructed. The constructed differential equations were solved numerically in the MAPLE-17 program, corresponding graphs were obtained and conclusions were given.
Downloads
References
Abrão, A. M., Faria, P. E., Rubio, J. C., Reis, P., & Davim, J. P. (2007). Drilling of fiber reinforced plastics: A review. Journal of Materials Processing Technology, 186(1-3), 1-7. https://doi.org/10.1016/j.jmatprotec.2006.11.146
Agblevor, F. A., Cundiff, J. S., Mingle, C., & Li, W. (2006). Storage and characterization of cotton gin waste for ethanol production. Resources, conservation and recycling, 46(2), 198-216. https://doi.org/10.1016/j.resconrec.2005.07.002
Akramjon, S., Rustam, M., Akmal, U., & Dilmurat, K. (2018). Movement Differential Equation of Seed Roller which Has Been Installed Stake Accelerator on the Roll Box of Gin Machine. Engineering, 10(8), 521-529.
Ariputra, I. G. N. B., & Sudiana, I. K. (2019). Effect of capital, manpower and raw materials on production and income of ukir kayu crafts industry. International Research Journal of Management, IT and Social Sciences, 6(5), 261-266.
Castellano, J. M., Gómez, M., Fernández, M., Esteban, L. S., & Carrasco, J. E. (2015). Study on the effects of raw materials composition and pelletization conditions on the quality and properties of pellets obtained from different woody and non woody biomasses. Fuel, 139, 629-636. https://doi.org/10.1016/j.fuel.2014.09.033
Copur, H. (2010). Linear stone cutting tests with chisel tools for identification of cutting principles and predicting performance of chain saw machines. International Journal of Rock Mechanics and Mining Sciences, 47(1), 104-120. https://doi.org/10.1016/j.ijrmms.2009.09.006
Fonteyne, M., Wickström, H., Peeters, E., Vercruysse, J., Ehlers, H., Peters, B. H., ... & De Beer, T. (2014). Influence of raw material properties upon critical quality attributes of continuously produced granules and tablets. European Journal of Pharmaceutics and Biopharmaceutics, 87(2), 252-263. https://doi.org/10.1016/j.ejpb.2014.02.011
Gáspár, M., Kálmán, G., & Réczey, K. (2007). Corn fiber as a raw material for hemicellulose and ethanol production. Process Biochemistry, 42(7), 1135-1139. https://doi.org/10.1016/j.procbio.2007.04.003
Haque, A. N. M. A., Remadevi, R., & Naebe, M. (2021). A review on cotton gin trash: sustainable commodity for material fabrication. Journal of Cleaner Production, 281, 125300. https://doi.org/10.1016/j.jclepro.2020.125300
Haque, A. N. M. A., Remadevi, R., Wang, X., & Naebe, M. (2020). Sorption properties of fabricated film from cotton gin trash. Materials Today: Proceedings, 31, S221-S226. https://doi.org/10.1016/j.matpr.2019.11.065
Jensen, L. R., Fundal, E., Møller, P., & Jespersen, M. (2011). Wear mechanism of abrasion resistant wear parts in raw material vertical roller mills. Wear, 271(11-12), 2707-2719. https://doi.org/10.1016/j.wear.2011.03.018
Matji, A., Carvajal, L., Conde, F., Peña, M. A., Donato, N., Serrano, D. R., & Torrado, J. J. (2017). Effect of the characteristics of raw material ibuprofen on roller compaction and dissolution. Journal of Drug Delivery Science and Technology, 42, 237-244. https://doi.org/10.1016/j.jddst.2017.03.020
Rasulov, A. M., & Rahmonov, D. A. (2011, June). The Study of Distribution of Ions channeling in two-component crystals by computer modeling. In INTERNATIONAL CONFERENCE ON FUTURE INFORMATION & COMMUNICATION ENGINEERING (Vol. 4, No. 1, pp. 268-271).
Rejabboev, S., Karimov, A., & Muradov, R. (2021). Theoretical study of the movement process of cotton seeds transported on a screw conveyor. ACADEMICIA: An International Multidisciplinary Research Journal, 11(3), 2300-2306.
Rejabboev, S., Muradov, R., & Sarimsakov, A. (2021). Residual fiber study in fiber-separated seeds. Asian Journal Of Multidimensional Research, 10(4), 783-787.
Sarimsakov, A. (2014). Modeling the Process of Interaction of a Moving Mass of Raw Cotton with a Rotating Saw Cylinder. Journal of “Problems of Mechanics, 2, 122-125.
Sarimsakov, A. U., Ahmedov, B., & Abdullajanov, B. (2020). To Study Circling of The Seed Roller at Ginning Process with Practical Method. The American Journal of Engineering and Technology, 2(11), 142-148.
Sarimsakov, A. U., Kurbonov, D. M., & Xalikov, S. S. (2019). The study of the crucible rotation of raw materials with a practical way. Economy and society, (12), 67.
Sarimsakov, A., Karimov, A. I., & Murodov, R. (2012). Static calculation of processes in the roll box of the saw gin. Problems of Mechanics, (2), 17-23.
Sarimsakov, A., Karimov, A., & Mardanov, B. (2015). Ginning as an Aspect of the Technological Process. International Journal of Experimental Education, (11-6), 948-951.
Sarimsakov, A., Muradov, R., & Mardonov, B. (2020). Modeling of the Process of Interaction of the Saw Cylinder with the Raw Material in the Process of Ginning. TEST Engineering and Managemant (Scopus) May-June, 27386-27391.
Tojimirzayevich, R. S. (2021, November). IMPROVEMENT OF COTTON SEED SORTING DEVICE. In Archive of Conferences (pp. 79-81).
Umarov, A., Ortikova, K., & Sarimsakov, A. (2020). Analysis of Speeds of Cylinders of Saw Gins and Linters and Determination of Critical Frequencies for them. Engineering, 12(10), 715.
Wisudawati, N. N. S., & Maheswari, A. I. A. (2018). Potential of Silver Craft Product through to Community-Based for Tourism Sustainability in Celuk Village. International research journal of management, IT and social sciences, 5(1), 9-15.
Published
How to Cite
Issue
Section
Copyright (c) 2022 International research journal of engineering, IT & scientific research
![Creative Commons License](http://i.creativecommons.org/l/by-nc-nd/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Articles published in the International Research Journal of Engineering, IT & Scientific research (IRJEIS) are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IRJEIS right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.
Articles published in IRJEIS can be copied, communicated and shared in their published form for non-commercial purposes provided full attribution is given to the author and the journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
This copyright notice applies to articles published in IRJEIS volumes 6 onwards. Please read about the copyright notices for previous volumes under Journal History.