Study of the under pass structure in Gatot Subroto – Cokroaminoto Intersection-Roads, Denpasar – Bali

I Made Jaya; I Ketut Sutapa; I Wayan Suasira; Made Suardana Kader; I Wayan Intara

doi:10.21744/irjeis.v8n4.2141

Authors

I Made Jaya
imadejaya2969@gmail.com
Department of Civil Engineering Bali State Polytechnic, Indonesia
I Ketut Sutapa Department of Civil Engineering Bali State Polytechnic, Indonesia
I Wayan Suasira Department of Civil Engineering Bali State Polytechnic, Indonesia
Made Suardana Kader Department of Civil Engineering Bali State Polytechnic, Indonesia
I Wayan Intara Department of Civil Engineering Bali State Polytechnic, Indonesia

Keywords:

bore pile, construction, secant pile, social and cultural aspects, underpass

Abstract

Denpasar represent town with amount of most resident in Bali and have tendency will increasingly. This of course will be followed by accelerating development various sector. This condition will be create various of urban problems, among the others problem is jam of traffic, that caused of existence of unbalanced between growth of very fast vehicle (14%) compared to with accretion of new streets which only reaching 3,6% a year. To overcome the problem one of the effort able to be conducted is by improving the quality of street service which have there, especially at critical joint streets and intersection streets, like Gatot Subroto - Cokroaminoto intersection-roads. However progressively is fast of accretion amount of vehicle, this methode will not can give optimal service, so that require to another way of problem solving. Other Arrangement Alternative to solve this jam is with intersection street is not at a piece of, such as which have been applied at Simpang Dewa Ruci. In general, the type of construction is fly over and underpass, but pursuant to experience at Simpang Dewa Ruci, from the social and culture aspect happened deduction of fly over type.

Downloads

Download data is not yet available.

References

Aditya Raharjo. (2012). Analysis of Stability and Deformation of Underpass Excavations in the Kuta- Bali Intersection Area, Universitas Pendidikan Indonesia.

Ali Zakariya. (2012). Calculation of the Structural Wall Pile, alizaka.blogspot.com. December 21, 2012,

Bowles, J.E., (1993). Analysis and Design of Foundations Volume 2, Erlangga, Jakarta.

Brehme, C. S., Tracey, J. A., Ewing, B. A., Hobbs, M. T., Launer, A. E., Matsuda, T. A., ... & Fisher, R. N. (2021). Responses of migratory amphibians to barrier fencing inform the spacing of road underpasses: A case study with California tiger salamanders (Ambystoma californiense) in Stanford, CA, USA. Global Ecology and Conservation, 31, e01857. https://doi.org/10.1016/j.gecco.2021.e01857

Chen, J. H., Yang, L. R., & Su, M. C. (2009). Comparison of SOM-based optimization and particle swarm optimization for minimizing the construction time of a secant pile wall. Automation in Construction, 18(6), 844-848. https://doi.org/10.1016/j.autcon.2009.03.008

Jiang, F., Ma, L., Broyd, T., Chen, K., & Luo, H. (2022). Underpass clearance checking in highway widening projects using digital twins. Automation in Construction, 141, 104406. https://doi.org/10.1016/j.autcon.2022.104406

Jin, D., Li, X., Yang, Y., Su, W., & Wang, X. (2020). Stochastic analysis of secant piles failure induced by random imperfections. Computers and Geotechnics, 124, 103640. https://doi.org/10.1016/j.compgeo.2020.103640

Kister, G., Winter, D., Gebremichael, Y. M., Leighton, J., Badcock, R. A., Tester, P. D., ... & Fernando, G. F. (2007). Methodology and integrity monitoring of foundation concrete piles using Bragg grating optical fibre sensors. Engineering Structures, 29(9), 2048-2055. https://doi.org/10.1016/j.engstruct.2006.10.021

Lam, C., Jefferis, S. A., Suckling, T. P., & Troughton, V. M. (2015). Effects of polymer and bentonite support fluids on the performance of bored piles. Soils and Foundations, 55(6), 1487-1500. https://doi.org/10.1016/j.sandf.2015.10.013

Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G., & Thorpe, T. (2012). Developments in construction-scale additive manufacturing processes. Automation in construction, 21, 262-268. https://doi.org/10.1016/j.autcon.2011.06.010

Ministry of Public Works. (1987). Guidelines for Highway Bridge Planning, SKBI – 1.3.28.1987.

Ministry of Public Works. (1997). Indonesian Road Capacity Manual (MKJI).

Ortiz, O., Castells, F., & Sonnemann, G. (2009). Sustainability in the construction industry: A review of recent developments based on LCA. Construction and building materials, 23(1), 28-39. https://doi.org/10.1016/j.conbuildmat.2007.11.012

Pacheco-Torgal, F., & Jalali, S. (2011). Nanotechnology: Advantages and drawbacks in the field of construction and building materials. Construction and building materials, 25(2), 582-590. https://doi.org/10.1016/j.conbuildmat.2010.07.009

Regional Regulation No. 16 of 2009 concerning the Spatial Plan for the Province of Bali.

Shavadze, L., Kevlishvili, M., Gagolishvili, M., & Shildelashvili, I. (2022). Medern methods of Phylloxera-resistant Rootstock Vine growth and formation. International Research Journal of Engineering, IT & Scientific Research, 8(3), 49-56. https://doi.org/10.21744/irjeis.v8n3.2086

Soilindo. (2013). Land Investigation Report of FS Underpass Gatsu, Denpasar.

Wysocki, O., Hoegner, L., & Stilla, U. (2022). Refinement of semantic 3D building models by reconstructing underpasses from MLS point clouds. International Journal of Applied Earth Observation and Geoinformation, 111, 102841. https://doi.org/10.1016/j.jag.2022.102841