The analysis of the unevenness of the loop pile fabrics by height

https://doi.org/10.21744/irjeis.v8n4.2152

Authors

  • Abdulaziz S. Dolimov Senior teacher, Department of Technology of Textile Products, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
  • Fayzirakhmon A. Kozakov Researcher, Department of Technology of Textile Products, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan

Keywords:

elastic cords, home clothes, pile height, ring pile fabrics, special looms

Abstract

In this article, an analysis of the unevenness of the loop pile fabrics, which are included in the pile tissue gap, was carried out. Fabric samples woven on the ITEMA-9500 loom were used. The organoleptic method was used as a method for determining the length of the rings, and the length of the rings was determined in laboratory conditions. Based on the analysis of the results of the experiment, it was found that the lengths of the hairs of the towel samples differed from each other, and the hair length increased from 9.5 to 10 mm on both sides of the towel samples. In addition, according to the analysis of the results, it was observed that the height of the bristles was different from the length of the loops on the front and back of the fabric, which ranged from 8 mm to 11.5 mm, which caused an unevenness of the height of the loops by 1.75 mm.

Downloads

Download data is not yet available.

References

Ahmadjonovich, KS, Lolashbayevich, MS, Gayratjonovich, MA, & Erkinzon, SD (2021). Characteristics of yarn spun on different spinning machines. Collection of scientific works ???O? .

Apsari, A. E., & Purnomo, H. (2020). An Occupational safety and health (OSH) factors identified in Indonesian batik textile small/medium enterprises. International Research Journal of Engineering, IT & Scientific Research, 6(2), 55-64. https://doi.org/10.21744/irjeis.v6n2.877

Bueno, M. A., Lamy, B., Renner, M., & Viallier-Raynard, P. (1996). Tribological investigation of textile fabrics. Wear, 195(1-2), 192-200. https://doi.org/10.1016/0043-1648(95)06848-1

Chatterjee, K. N., Jhanji, Y., Grover, T., Bansal, N., & Bhattacharyya, S. (2015). Selecting garment accessories, trims, and closures. In Garment Manufacturing Technology (pp. 129-184). Woodhead Publishing. https://doi.org/10.1016/B978-1-78242-232-7.00006-0

Cristea, D., & Vilarem, G. (2006). Improving light fastness of natural dyes on cotton yarn. Dyes and pigments, 70(3), 238-245. https://doi.org/10.1016/j.dyepig.2005.03.006

Cruz, J., Leitão, A., Silveira, D., Pichandi, S., Pinto, M., & Fangueiro, R. (2017). Study of moisture absorption characteristics of cotton terry towel fabrics. Procedia Engineering, 200, 389-398. https://doi.org/10.1016/j.proeng.2017.07.055

Doniyor, P., & Khabibulla, P. (2021). Theoretical research of mechanics of yarns in assembly winding machines. International Research Journal of Engineering, IT & Scientific Research, 7(5), 193-202. https://doi.org/10.21744/irjeis.v7n5.1928

Erkinov, Z., Abduvaliyev, D., Izatillya, M., & Qorabayev, S. (2020). Theoretical studies on the definition of the law of motion and the equilibrium provision of the ball regulating the uniform distribution of the torque along the yarn. ACADEMICIA: An International Multidisciplinary Research Journal, 10(11), 2338-2347.

Gong, R. H. (2015). Yarn to fabric: specialist fabric structures. In Textiles and Fashion (pp. 337-354). Woodhead Publishing. https://doi.org/10.1016/B978-1-84569-931-4.00014-3

Gong, X., Chen, X., & Zhou, Y. (2018). Advanced weaving technologies for high-performance fabrics. In High-Performance Apparel (pp. 75-112). Woodhead Publishing. https://doi.org/10.1016/B978-0-08-100904-8.00004-3

Jamshaid, H., Hussain, U., Mishra, R., Tichy, M., & Muller, M. (2021). Turning textile waste into valuable yarn. Cleaner Engineering and Technology, 5, 100341. https://doi.org/10.1016/j.clet.2021.100341

Korabayev, S. A., Mardonovich, M. B., Lolashbayevich, M. S., & Xaydar?vich, M. U. (2019). Determination of the Law of Motion of the Yarn in the Spin Intensifier. Engineering, 11(5), 300-306.

Korabayev, S. A., Matismailov, S. L., & Salohiddinov, J. Z. (2018). Investigation of the impact of the rotation frequency of the discretizing drum on the physical and mechanical properties of. Central Asian Problems of Modern Science and Education, 3(4), 65-69.

Muzyczek, M. (2020). The use of flax and hemp for textile applications. In Handbook of natural fibres (pp. 147-167). Woodhead Publishing. https://doi.org/10.1016/B978-0-12-818782-1.00004-3

Omonbekovna, U. M., & Siddiqovich, S. P. (2022). Quality Foundation Factors In The Production Of Warp Hairy Abr Fabric Corresponding To The Suit. Journal of Positive School Psychology, 2939-2946.

Özdil, N., Marmaral?, A., & Kretzschmar, S. D. (2007). Effect of yarn properties on thermal comfort of knitted fabrics. International journal of Thermal sciences, 46(12), 1318-1322. https://doi.org/10.1016/j.ijthermalsci.2006.12.002

Tursunbayevich, Y. A. (2021). Investigation of Influence ofa New Twist Intensifier on the Properties of the Twisted Yarn. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(5), 1943-1949.

Tyagi, G. K. (2010). Yarn structure and properties from different spinning techniques. In Advances in Yarn Spinning Technology (pp. 119-154). Woodhead Publishing. https://doi.org/10.1533/9780857090218.1.119

Ugli, I. M. M., & Ahmadjonovich, K. S. (2020). Experimental Studies Of Shirt Tissue Structure. The American Journal of Applied sciences, 2(11), 44-51.

Published

2022-07-26

How to Cite

Dolimov, A. S., & Kozakov, F. A. (2022). The analysis of the unevenness of the loop pile fabrics by height. International Research Journal of Engineering, IT & Scientific Research, 8(4), 132–138. https://doi.org/10.21744/irjeis.v8n4.2152

Issue

Vol. 8 No. 4 (2022): July

Section

Research Articles
Copyright & Licensing

Copyright (c) 2022 International research journal of engineering, IT & scientific research

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Articles published in the International Research Journal of Engineering, IT & Scientific research (IRJEIS) are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IRJEIS right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.

Articles published in IRJEIS can be copied, communicated and shared in their published form for non-commercial purposes provided full attribution is given to the author and the journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

This copyright notice applies to articles published in IRJEIS volumes 6 onwards. Please read about the copyright notices for previous volumes under Journal History.