Review of the use of cross iron in reinforced concrete column as an alternative to shoes column

https://doi.org/10.21744/irjeis.v8n5.2174

Authors

  • B. Army Department of Civil Engineering Padang State Polytechnic, Indonesia
  • I. Wayan Sujahtra Department of Civil Engineering Bali State Polytechnic, Indonesia
  • I. Nyoman Ramia Department of Civil Engineering Bali State Polytechnic, Indonesia
  • I. Ketut Sutapa Department of Civil Engineering Bali State Polytechnic, Indonesia

Keywords:

column shoes, concrete column shoes, cross iron, formwork iron stack, steel reinforced concrete

Abstract

Column shoe is the lower end of the column as high as (50-70) mm which is casted first from the column above it to make it easier to determine the column dimensions, determine the shape of the column cross section, and determine the position of the column. Column shoes Together with the formwork iron stack, clamping the formwork and making it easier to install the column formworkColumn shoes from site mix concrete have a weakness in terms of the concrete being non-uniform with the column concrete above it is feared to have problems with the bending moment, Mu, at the end of the column and the normal force, Pu Column shoes made of reinforced concrete are more practical, more economical and simpler and save project execution time, there is no problem with bending moments and normal forces acting on the column because the quality of the column concrete is uniform with the quality of the column shoes and cast at the same time.

Downloads

Download data is not yet available.

References

Arsyal N, A. M. (2019). Kapasitas Lentur Kolom Pracetak Beton Bertulang (Doctoral dissertation, Universitas Hasanuddin).

Assa, J. I., Mandagi, R. J., Tjakra, J., & Sibi, M. (2014). Kajian Peranan Pengelola Proyek Dalam Menyelenggarakan Proyek Pada Tahap Pelaksanaan. Jurnal Sipil Statik, 2(2).

Berke, N. S., & Hicks, M. C. (2004). Predicting long-term durability of steel reinforced concrete with calcium nitrite corrosion inhibitor. Cement and Concrete Composites, 26(3), 191-198. https://doi.org/10.1016/S0958-9465(03)00038-6

Feng, W., Tarakbay, A., Memon, S. A., Tang, W., & Cui, H. (2021). Methods of accelerating chloride-induced corrosion in steel-reinforced concrete: A comparative review. Construction and Building Materials, 289, 123165. https://doi.org/10.1016/j.conbuildmat.2021.123165

Gerilla, G. P., Teknomo, K., & Hokao, K. (2007). An environmental assessment of wood and steel reinforced concrete housing construction. Building and Environment, 42(7), 2778-2784. https://doi.org/10.1016/j.buildenv.2006.07.021

Kinnunen, J. (2017). ETA tests and design of HPKM Column Shoe Connections. Procedia Engineering, 172, 521-528. https://doi.org/10.1016/j.proeng.2017.02.061

Nascimbene, R., & Bianco, L. (2021). Cyclic response of column to foundation connections of reinforced concrete precast structures: Numerical and experimental comparisons. Engineering Structures, 247, 113214. https://doi.org/10.1016/j.engstruct.2021.113214

Obayi, C. S., Tolouei, R., Paternoster, C., Turgeon, S., Okorie, B. A., Obikwelu, D. O., ... & Mantovani, D. (2015). Influence of cross-rolling on the micro-texture and biodegradation of pure iron as biodegradable material for medical implants. Acta biomaterialia, 17, 68-77. https://doi.org/10.1016/j.actbio.2015.01.024

Parraga, W. E. R., Parraga, M. A. C., Salazar, M. J. V., & Albear, J. J. H. (2017). Reusing the coconut clay (brick) as construction material. International Research Journal of Engineering, IT & Scientific Research, 3(4), 102-109. Retrieved from https://sloap.org/journals/index.php/irjeis/article/view/555

Purwanto, P., Adi, R. Y., Yumastuti, A., & Amelia, F. D. (2020). Kuat Tarik Interfase Antara Beton Lama Dan Beton Baru Dengan Variabel Beton Geopolimer Dan Beton Konvensional. Jurnal DISPROTEK, 11(2), 78-87.

Rasiwan, R., Syahrani, D., Supardi, I., Rabihati, E., Abduh, M., & Haryani, S. (2022). Concrete characteristics using aggregate from Nanga Jemah Village, Kapuas Hulu District for rabat beton road. International Research Journal of Engineering, IT & Scientific Research, 8(5), 159-166. https://doi.org/10.21744/irjeis.v8n5.2158

Shi, X., Xie, N., Fortune, K., & Gong, J. (2012). Durability of steel reinforced concrete in chloride environments: An overview. Construction and Building Materials, 30, 125-138. https://doi.org/10.1016/j.conbuildmat.2011.12.038

Suhendro, B. (2000). Teori Model Struktur dan Teknik Eksperimental. Beta Offset, Yogyakarta.

Tarabia, A. M., & Albakry, H. F. (2014). Strengthening of RC columns by steel angles and strips. Alexandria Engineering Journal, 53(3), 615-626. https://doi.org/10.1016/j.aej.2014.04.005

Tjokrodimoeljo, K. (1989). Teknologi Beton, Nafiri offset, Univeritas Gadjah Mada, Yogyakarta

Wang, G., Li, Y., Li, Z., & Ingham, J. M. (2020, December). Experimental and numerical study of precast concrete columns with hybrid bolted splice connections. In Structures (Vol. 28, pp. 17-36). Elsevier. https://doi.org/10.1016/j.istruc.2020.08.042

Xie, S. R., Pan, H., Chen, D. D., Zeng, J. C., Song, H. Z., Cheng, Q., ... & Li, Y. H. (2020). Stability analysis of integral load-bearing structure of surrounding rock of gob-side entry retention with flexible concrete formwork. Tunnelling and Underground Space Technology, 103, 103492. https://doi.org/10.1016/j.tust.2020.103492

Published

2022-08-19

How to Cite

Army, B., Sujahtra, I. W., Ramia, I. N., & Sutapa, I. K. (2022). Review of the use of cross iron in reinforced concrete column as an alternative to shoes column. International Research Journal of Engineering, IT & Scientific Research, 8(5), 178–186. https://doi.org/10.21744/irjeis.v8n5.2174

Issue

Section

Research Articles