Analysis of labor productivity in reinforced concrete structures using time study methods

https://doi.org/10.21744/irjeis.v10n3.2434

Authors

  • I Made Anom Santiana Bali State Polytechnic, Badung, Indonesia
  • I Wayan Sujahtra Bali State Polytechnic, Badung, Indonesia
  • I Made Tapayasa Bali State Polytechnic, Badung, Indonesia
  • I Gede Sastra Wibawa Bali State Polytechnic, Badung, Indonesia
  • I Wayan Sudiasa Bali State Polytechnic, Badung, Indonesia

Keywords:

concrete structures, contractors, construction projects, productivity, time study

Abstract

The source of the success of a project in fulfilling the three aspects namely cost, quality, and time from one of the existing resources is the productivity of its workforce. The time study method is the right method used to determine the standard time of a job. The average value of productivity on column formwork is 10.65 m2/OH, beam formwork is 46.89 m2/OH, and plate formwork is 73.29 m2/OH. Column reinforcement work 204.51 kg/OH, beam reinforcement work 349.93 kg/OH, plate reinforcement work 287.57 kg/OH. Column casting work 7.96 m3/OH, beam casting work 25.31 m3/OH, plate casting work 15.81 m3/OH. Several factors greatly affect labor productivity. Comparison of the work productivity of reinforced concrete structures in the Ubud Market project based on the calculation results obtained the average productivity coefficient in the field of labor.

Downloads

Download data is not yet available.

References

Abanda, F. H., Vidalakis, C., Oti, A. H., & Tah, J. H. (2015). A critical analysis of Building Information Modelling systems used in construction projects. Advances in Engineering Software, 90, 183-201. https://doi.org/10.1016/j.advengsoft.2015.08.009

Ahmad, S. (2003). Reinforcement corrosion in concrete structures, its monitoring and service life prediction––a review. Cement and concrete composites, 25(4-5), 459-471. https://doi.org/10.1016/S0958-9465(02)00086-0

Asiyanto, W. (2005). Construction Project Cost Management. Jakarta: Pradyna Paramita.

Cheng, Y. M. (2014). An exploration into cost-influencing factors on construction projects. International Journal of Project Management, 32(5), 850-860. https://doi.org/10.1016/j.ijproman.2013.10.003

Diputra, G. A. (2015). Analisis produktivitas tenaga kerja pada pekerjaan struktur beton balok dan pelat lantai. Journal Of Chemical Information And Modeling, 9, 1689-1699.

Ervianto, W. I. (2005). Manajemen proyek konstruksi edisi revisi. Yogyakarta: Andi.

Hutasoit, J. P., Sibi, M., & Inkiriwang, R. L. (2017). Analisis Produktivitas Tenaga Kerja Konstruksi Pada Pekerjaan Pasangan Lantai Keramik dan Plesteran Dinding Menggunakan Metode Work Sampling (Studi Kasus: Bangunan Gedung Pendidikan Fakultas Kedokteran). Jurnal Sipil Statik, 5(4).

Lidelöw, H., & Simu, K. (2015). Understanding construction contractors and their operations strategies. Procedia economics and finance, 21, 48-56. https://doi.org/10.1016/S2212-5671(15)00149-5

Malamassam, L. (2016). Analisa Produktivitas Pekerja Dengan Metode Time Study Pada Proyek Pembangunan Gedung Teknik Industri ITS. Surabaya: Institut Teknologi Sepuluh Nopember.

Marzouk, M. M., El Kherbawy, A. A., & Khalifa, M. (2013). Factors influencing sub-contractors selection in construction projects. Hbrc Journal, 9(2), 150-158. https://doi.org/10.1016/j.hbrcj.2013.05.001

McCarter, W. J., & Vennesland, Ø. (2004). Sensor systems for use in reinforced concrete structures. Construction and Building Materials, 18(6), 351-358. https://doi.org/10.1016/j.conbuildmat.2004.03.008

Muchdarsyah, S. (2003). Produktivitas apa dan Bagaimana. Bumi Aksara, Jakarta.

Müller, H. S., Haist, M., & Vogel, M. (2014). Assessment of the sustainability potential of concrete and concrete structures considering their environmental impact, performance and lifetime. Construction and Building Materials, 67, 321-337. https://doi.org/10.1016/j.conbuildmat.2014.01.039

Nasirzadeh, F., & Nojedehi, P. (2013). Dynamic modeling of labor productivity in construction projects. International journal of project management, 31(6), 903-911. https://doi.org/10.1016/j.ijproman.2012.11.003

Poirier, E. A., Staub-French, S., & Forgues, D. (2015). Measuring the impact of BIM on labor productivity in a small specialty contracting enterprise through action-research. Automation in construction, 58, 74-84. https://doi.org/10.1016/j.autcon.2015.07.002

Putra, H. S. R. (2009). Manajemen Keuangan dan Akuntansi Untuk Eksekutif Perusahaan. Jakarta: Salemba Empat.

Serpella, A. F., Ferrada, X., Howard, R., & Rubio, L. (2014). Risk management in construction projects: a knowledge-based approach. Procedia-Social and Behavioral Sciences, 119, 653-662. https://doi.org/10.1016/j.sbspro.2014.03.073

Sinungan, M. (2018). Produktivitas apa dan Bagaimana. Bumi Aksara.

Soeharto, I. (1997). Manajemen proyek dari konseptual sampai operasional.

Soeharto, I. (1997). Manajemen proyek dari konseptual sampai operasional.

Wibawa, I. G. S., Santiana, I. M. A., Suasira, I. W., Sudiasa, I. W., & Sumardika, A. A. N. R. (2023). Risk analysis of material management that causes cost and time deviations in high-story building projects. International Research Journal of Engineering, IT & Scientific Research, 9(6), 231–239. https://doi.org/10.21744/irjeis.v9n6.2378

Published

2024-05-26

How to Cite

Santiana, I. M. A., Sujahtra, I. W., Tapayasa, I. M., Wibawa, I. G. S., & Sudiasa, I. W. (2024). Analysis of labor productivity in reinforced concrete structures using time study methods. International Research Journal of Engineering, IT & Scientific Research, 10(3), 38–48. https://doi.org/10.21744/irjeis.v10n3.2434

Issue

Vol. 10 No. 3 (2024): May

Section

Research Articles
Copyright & Licensing

Copyright (c) 2024 International research journal of engineering, IT & scientific research

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Articles published in the International Research Journal of Engineering, IT & Scientific research (IRJEIS) are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IRJEIS right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.

Articles published in IRJEIS can be copied, communicated and shared in their published form for non-commercial purposes provided full attribution is given to the author and the journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

This copyright notice applies to articles published in IRJEIS volumes 6 onwards. Please read about the copyright notices for previous volumes under Journal History.