Analysis of SMK3 implementation on building construction project implementation performance
Case study of the construction of the Menara Mandiri building in Denpasar
Keywords:
construction project, implementation assessment, occupational safety and health, OSHMS, safety trainingAbstract
The construction industry is inherently associated with a high risk of occupational accidents. A major contributing factor to such incidents is the inadequate implementation of Occupational Safety and Health (OSH) practices. To mitigate these risks, the professional application of the Occupational Safety and Health Management System (OSHMS) is crucial and should comply with relevant laws and government regulations. This study aims to assess the level of OSHMS implementation in the construction of the Menara Mandiri Building in Denpasar and to identify key factors influencing its application. A qualitative descriptive method was employed, with data collected through the use of checklists and questionnaires. The data were analyzed using percentage analysis to determine the implementation level, descriptive statistics (mean values), and ranking analysis to identify influential factors. The findings indicate that the OSHMS implementation level was satisfactory, with a compliance rate of 96.39% and a minor non-compliance rate of 3.61%. The most significant factor influencing the implementation of OSHMS was the availability of occupational safety and health training for workers.
Downloads
References
Creswell, J. W. (2014). Research Design: Qualitative, Quantitative, and Mixed Methods Approaches (4th ed.). SAGE Publications.
Ghozali, I. (2016). Aplikasi Analisis Multivariate dengan Program IBM SPSS 23. Badan Penerbit Universitas Diponegoro.
Huda, M. A., Wibowo, M. A., & Purwanto, A. (2021). Pengaruh Penerapan Sistem Manajemen K3 terhadap Kinerja Proyek Konstruksi. Jurnal Karya Teknik Sipil, 10(2), 123-134.
Ismail, Z., Wahyuni, S., & Ramadhan, F. (2020). Analisis Risiko Kecelakaan Kerja pada Proyek Konstruksi Gedung Bertingkat. Jurnal Ilmiah Teknik Sipil, 24(1), 45-56.
Kementerian Ketenagakerjaan Republik Indonesia. (2012). Peraturan Pemerintah No. 50 Tahun 2012 tentang Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja.
Kementerian Ketenagakerjaan Republik Indonesia. (2012). Peraturan Pemerintah No. 50 Tahun 2012 tentang Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja.
Liu, R., Liu, H. C., Shi, H., & Gu, X. (2023). Occupational health and safety risk assessment: A systematic literature review of models, methods, and applications. Safety science, 160, 106050. https://doi.org/10.1016/j.ssci.2022.106050
Nugraha, D., Lestari, N., & Maulana, A. (2022). Kendala Implementasi SMK3 pada Proyek Konstruksi di Indonesia. Jurnal Manajemen Proyek, 5(1), 67–76.
Popov, V., Juocevicius, V., Migilinskas, D., Ustinovichius, L., & Mikalauskas, S. (2010). The use of a virtual building design and construction model for developing an effective project concept in 5D environment. Automation in construction, 19(3), 357-367. https://doi.org/10.1016/j.autcon.2009.12.005
Putra, I. G. P., & Ramli, R. (2019). Penerapan Sistem Manajemen K3 terhadap Efektivitas Pelaksanaan Proyek Konstruksi di Kota Denpasar. Jurnal Teknik Sipil dan Lingkungan, 4(3), 145-154.
Rokooei, S., Shojaei, A., Alvanchi, A., Azad, R., & Didehvar, N. (2023). Virtual reality application for construction safety training. Safety science, 157, 105925. https://doi.org/10.1016/j.ssci.2022.105925
Santoso, S. (2017). Menguasai statistik dengan SPSS 24. Elex Media Komputindo.
Sugiyono. (2018). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Alfabeta.
Sutapa, I. K., Yuni, N. K. S. E., Susila, I. N. D., Wibawa, . I. G. S., & Santiana, I. M. A. (2022). Evaluation of the implementation of occupational safety and health management systems on the ayana nort wing bali construction project. International Research Journal of Engineering, IT and Scientific Research, 8(1), 1–6. https://doi.org/10.21744/irjeis.v8n1.2034
Published
How to Cite
Issue
Section
Copyright (c) 2025 International research journal of engineering, IT and scientific research
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Articles published in the International Research Journal of Engineering, IT & Scientific research (IRJEIS) are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IRJEIS right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.
Articles published in IRJEIS can be copied, communicated and shared in their published form for non-commercial purposes provided full attribution is given to the author and the journal. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
This copyright notice applies to articles published in IRJEIS volumes 6 onwards. Please read about the copyright notices for previous volumes under Journal History.
