Workload evaluation towards the dodol workers from dryer section in Buleleng Bali

Authors

  • I Gede Santosa A Senior Lecturer of Bali State Polytechnic, Indonesia
  • I Nyoman Sutarna A Senior Lecturer of Bali State Polytechnic, Indonesia

Keywords:

Buleleng Bali, dodol workers, dryer section, penglatan village, workload evaluation

Abstract

Penglatan village, one of the villages in Buleleng Regency-Bali, is the center of dodol industry, with a number of makers up to 44 small group makers, on which each group consisting of 6 to 8 workers. Dodol is a sweet snack that has been sold to many regions in Bali as well as to modern markets such as minimarkets or supermarkets and Bali souvenir shops. In Bali, dodol has become one of the traditional snacks used for offering in the religious ceremony. The making process of dodol consisted of several processes, which were dough making, cooking, packaging/wrapping, and lastly, drying. The drying process was done by the workers through the natural method by utilizing the traditional tool to spread the dodol on the bamboo mat on which afterward, continued by drying them in the sun. The kind of drying process can cause ergonomic problems such as pain in the neck, shoulder, back, lower back, head, and hands. As a result, it can decrease work productivity as well as product quality.

Downloads

Download data is not yet available.

References

Adiputra, N. (2004). Ergonomi. Disampaikan dalam Pelatihan Upaya Kesehatan Kerja Tenaga Kesehatan Kabupaten/Kota dan Puskesmas Propinsi Bali, Denpasar, 23-27.

Almatsier, S. (2001). Mineral mikro. Prinsip dasar ilmu gizi. 1st edition. Jakarta: PT. Gramedia Pustaka Utama, 249-57.

Artayasa, I. N., Adiputra, N., & Manuaba, I. B. (2007). Pendekatan Ergonomi Total Meningkatkan Kualitas Hidup Pekerja Wanita Pengangkut Kelapa Di Banjar Semaja Antosari Selemadeg, Tabanan, Bali. Jurnal Ilmiah Kedokteran, MEDICINA, 38(3), 189-193.

Bridger, R. (2008). Introduction to ergonomics. Crc Press.

Darlis, D., Widagdo, S., & Kiswanta, K. (2011). analisis kenyamanan kerja berdasarkan pengukuran temperatur udara di ruang kendali utama untai uji termohidrolika reaktor. SIGMA EPSILON-Buletin Ilmiah Teknologi Keselamatan Reaktor Nuklir, 12(3).

Grandjean, E., & Kroemer, K. H. E. (2009). The design of workstations. In Fitting the Task to the Man: A Textbook of Occupational Ergonomics (pp. 56-59). Taylor & Francis e-Library, London.

Haslegrave, C. M., & Pheasant, S. (2005). Bodyspace: anthropometry, ergonomics and the design of work.

Helander, M. G., & Shuan, L. (2005, May). Reducing Design Complexxity Will Improve Usability in Product Design. In Proceeding of Seaes IPS Conference (pp. 23-25).

IM, M. (2014). Perbaikan Kondisi Kerja Komputer Menurunkan Work Average Voltage Otot, Beban Kerja, Keluhan Muskuloskeletal dan Kelelahan Mahasiswa Desain Komunikasi Visual Institut “X” di Denpasar (Disertasi). Denpasar: Program Pascasarjana Universitas Udayana.

Kee, D., & Karwowski, W. (2007). A comparison of three observational techniques for assessing postural loads in industry. International Journal of Occupational Safety and Ergonomics, 13(1), 3-14. https://doi.org/10.1080/10803548.2007.11076704

Kodrat, K. F. (2012). Pengaruh shift kerja terhadap kelelahan pekerja pabrik kelapa sawit di pt. X labuhan batu. Jurnal Teknik Industri, 12(2), 110-117.

Lu, J. L. (2007). Gender differentiation among farmers in the agricultural sector in Benguet, Philippines. Journal of International Women's Studies, 9(1), 176-199.

Maheswari, R. A. dan Wulandari, Z. 2004. Standardization of heating on the processing of dodol in scale of the home industry.

Manuaba, A. (2000). Ergonomi, kesehatan dan keselamatan kerja. In Proceedings Seminar Nasional Ergonomi.

Manuaba, A. (2003). Aplikasi Ergonomi dengan Pendekatan Holistik perlu, demi hasil yang lebih Lestari dan mampu bersaing. Makalah Temu Ilmiah dan Musyawarah Nasional Keselamatan dan Kesehatan Kerja Ergonomi.

Mei, Z., Grummer-Strawn, L. M., Pietrobelli, A., Goulding, A., Goran, M. I., & Dietz, W. H. (2002). Validity of body mass index compared with other body-composition screening indexes for the assessment of body fatness in children and adolescents. The American journal of clinical nutrition, 75(6), 978-985. https://doi.org/10.1093/ajcn/75.6.978

Nasional, B. S. (1995). Standar Nasional Indonesia. Surimi Beku.

Purnomo, H., & Janari, D. (2015). Rancang Bangun Mesin Pengupas, Penghancur Dan Pengayak Sabut Kelapa. Spektrum Industri, 13(1), 51-58.

Robbins, S. P., & Judge Timothy, A. (2008). Perilaku Organisasi Edisi 12 Buku 1 (Diana Angelica, penerjemah). Jakarta: Salemba Empat.

Santoso, G. (2004). Manajemen keselamatan dan kesehatan kerja. Prestasi Pustaka Publisher.

Saptarini, N. M. (2007). Pengaruh Penambahan Pengawet (Nipagin, Nipasol, dan Kalsium Propionat) Terhadap Pertumbuhan Kapang Syncephalastrum Racemosum pada Dodol Susu. Abstrak.

Setiawan, H. (2014). Desain Lingkungan Kerja Industri Karet Berbasis Ergonomi Guna Reduksi Beban Kerja Dan Peningkatan Produktivitas. Jurnal Teknologi, 7(1).

Suma’mur, P. K. (1982). Ergonomi untuk Kesehatan Kerja. Yayasan Swabhawa Karya Jakarta.[Google Scholar].

Torik, H., & Ari, S. (2009). Perancangan Sistem Kerja Ergonomis Untuk Mengurangi Tingkat Kelelahan. Jurnal Inasea, 10(01).

Published

2016-11-30

How to Cite

Santosa, I. G., & Sutarna, I. N. (2016). Workload evaluation towards the dodol workers from dryer section in Buleleng Bali. International Research Journal of Engineering, IT and Scientific Research, 2(11), 66–74. Retrieved from https://sloap.org/journals/index.php/irjeis/article/view/522

Issue

Section

Research Articles